Coal Press Machine suppliers Features: Coal briquette machine is also called strong briquette press, metal powder briquetting machine, roller briquetting machine, goose egg briquetting machine and so on. Ball pressing machine is mainly used to make non-ferrous and ferrous metal ore powder balls, directly into the furnace for smelting, increasing the added value. All metallurgical waste and auxiliary materials to be loaded into the furnace must be completed by a ball baler. For example: dust removal ash, pond mud, oxide scale, steel slag, iron powder, aluminum ash powder, silica manganese, metallic powder and so on. Parameter: Model290360400450550650750850 Product output1-2t/h4t/h6t/h8t/h10t/h15t/h20t/h30t/h Width of roller200mm240mm250mm280mm300mm336mm400mm500mm Diameter of roller290mm360mm400mm450mm550mm650mm750mm850mm Power5.5kw7.5-15kw11-18.5kw15-22kw18.5-30kw30-45kw55-75kw75-90kw Speed of main shaft27r/min18r/min15r/min13r/min10r/min RetarderZQ235ZQ350 ZQ400ZQ400 ZQ500ZQ500ZQ500 ZQ650ZQ650 ZQ750ZQ750ZQ850 Type of pressure MechanicalMechanical hydraulic Material of roller65Mn65Mn 9cr2Mn From of structure Two roller single pressFour roller double press Bearing of main shaft 319*42097724*42097732*42097734*4 Main shaft45# SteelD:95mm 45# SteelD:110mm 45# SteelD:120mm 45# SteelD:135mm Forging steelD:165mm Forging steelD:250mm Forging steel Shape and sizeAccording to your request Precautions: The pelletizing process of the coal briquette machine has a lot to do with the raw materials. If the size of the raw coal particles is too large or too small, it will have an effect. Therefore, in order to improve the ball forming rate and quality strength for the ash ball press, the materials should be well prepared. Proper processing and use, the crusher used can break the raw materials well, and the mixer can better mix the adhesive materials and products together, so that the quality of the pellets is more assured, and the materials are guaranteed to be in the ball. They are not loose when the ball enters the pressure, and the bulk density is even and consistent to avoid virtual balls that are not tight. Product quality improvement. Raw Materials Requirements: Precipitator dust, iron concentrate, raw material powder, manganese ore fines, coal powder, charcoal powder, metallic powder, iron scale, iron sludge, slime peat, fireproof material, desulfurized gypsum and dolomite,etc . Working principle: Coal briquette machine of the main motor is transmitted to the reducer through the V-belt: the reducer is transmitted to the drive shaft through the coupling, and then by a pair of open gears to ensure the cylinder shaft synchronization (the same speed is opposite) The driven cylinder is driven by a piston on top of the hydraulic cylinder (iron-supported fixed pressure type oblique), the pressure of the system is ensured by the hydraulic circuit, the hydraulic control valve and the accumulator. 聽The materials enter into the hopper of the forming machine evenly from the storage box through the quantitative equipment, and pass through the adjusting gate on the hopper, adjust to make the material enter uniformly into the middle of the pair of rollers. The material briquetting unit is compressed from small to large. The forming pressure at the middle line of the pair of rollers reaches a large value. After the material passes through the line, the pressure decreases rapidly so that the material enters into the ball state and exits the ball smoothly.Coal Press Machine suppliers website:http://www.zhongxiangmachinery.com/briquette-machine/coal-press-machine/